Consolidated Instrument
P/N: 4716-0968

The newly designed Atec Consolidated Instrument is a form, fit and functional equivalent to the technically outdated A/M37T-20B instrument currently existing in the field. All indications, interface connections and inputs have been retained to make the installation and use of these instruments as simple as plug and play. The new design of the Consolidated Instrument and Remote Display require they function as a set. That is, early models of the Consolidated Instrument will not drive the new Remote Display indications.

The Consolidated Instrument is part of the redesigned A/M37T-20B instrument package that allows the US Air Force and foreign militaries to retain redundancy of signals in the control cab while utilizing existing cables and adapter kits, something not possible on the new T-20C instrumentation package. The new family of T-20B instruments reduces calibration time by utilizing the DAQ modules ability to accept calibrated signals and creates indication offsets.

The new Consolidated Instrument will read the analog inputs with 18-bit accuracy. A CPU card will read the data in engineering units from the data acquisition module via RS232. The corresponding signals are displayed on a backlit alphanumeric 24X2 LCD display.

Key Features

• COTS DAQ internal module
• Digital output for data acquisition interface
• High accuracy due to integrating analog to digital conversion with 16-bit resolution and 50/60 HZ noise rejections.
• High component reliability
• Minimal components
• Widely used in the process industry and refineries
• Supportability
• Interchangeable with other cots DAQ modules by changing software drivers
• Connected to CPU via a single RS232 cable
• Modules are factory repairable.